What is Camera Shake? | Definition, Tips, and Examples

This is a guide covering camera shake.

The fabled camera shake happens to every photographer big or small every now and again. Anyone who has ever held and shot a camera has most likely experienced it at least once.

In this article, we will talk about camera shake in photography, everything around it, including how to fix camera shake.

Without further ado, let’s start with the definition, shall we?

camera shake

What is Camera Shake?

Camera shake is the act of accidentally shaking the camera while shooting. Most of the time, the accidental shaking is due to unsteady hands that result in blurry images.

Now take note of the usage of the word accidentally here. Photography has many ways to convey its images, the same thing applies to the many methods involved in inducing the effect to the image viewers.

Camera shake can certainly be used intentionally by photographers. I’ll explain more about that later.

More importantly, where does the camera shake come from?

What is Camera Shake?

What Causes Camera Shake?

As one of the curses that strikes fear into the hands of photographers, camera shake has become the biggest factor in trashed photos. One little shake will lead to a blurred image.

Accidentally blurred images affect the viewers perception of the image, while also making it appear unclear.

Camera shake will often occur when shooting using a slow shutter speed. By using a slow shutter speed, the camera becomes more sensitive towards your body shaking.

Basically, the slower the shutter speed, the more likely you will blur your photo.

It is quite hard to be perfectly still while holding a camera. I mean, cameras are heavy and as a living human being we “naturally” shake because of our breathing, muscular tension, fatigue, etc.

This is why people made camera tripods.

Other factors that contribute to camera shake are the heavy lenses, which require a lot of strength to keep still. Luckily, the solution is quite simple for this, you just need to pull out your fancy tripod and camera release.

What Causes Camera Shake?

Why is Camera Shake Bad for Photography?

A hint of accidental camera shake will easily ruin the output of your long exposure shots and other types of photos. A shaky camera produces blur, which “blurs” your photo clarity.

The original message inside the image will easily become distorted and most likely be misinterpreted. These are all the obvious reasons why photographs avoid accidental blur.

Why is Camera Shake Bad for Photography?

Is There a Reason to Use Camera Shake?

At this point, you may think that camera shake is the bane of photography. Yet camera shake photography, as weird as it sounds, exists.

Panning is a technique that involves intentional camera movement, highlighting the intentional part here. By following the subject’s movements, photographers are able to keep them sharp while making the background appear blurry.

This method is commonly used to make the viewers feel a sense of speed from the subject. Panning often appears in street photography, car race photography, wildlife photography, etc.

Creatively speaking, you can also experiment with long exposures. Fast and bright objects leave a trail of light in long exposures, check out “Bulb Photography” for more detail.

Commonly people use this long exposure trick to take photos of a lively city, or a sky full of stars.

Furthermore, modern photographers are starting to bend the traditional rules and stereotypes according to their boundless creativity. Lens flare and over exposure are starting to be accepted in the community.

This means that you can experiment creatively using the information and effects from the camera shake to add certain feelings to the image. Shaking your camera during long exposures will add these soft textures to your subjects, which may or may not work.

But hey! Experiment anyways and maybe do not obsessively do it; I recommend doing it occasionally.

Car racing

How to Stop the Camera from Shaking?

Naturally, camera manufacturers realized that photographers would need some sort of technology to help shoot in varied conditions, and required easy solutions.

Things happened and now we have fancy camera settings to help us with just that.

Let’s take a look at camera settings to help you avoid camera shake.

Cameras will often offer some kind of image stabilization feature. Different manufacturers use different names for this feature.

The feature can either be found at the camera lens or in the camera sensor.

1. Use the Image Stabilization feature

The feature tries to cancel your camera movement in real time by sensing it. By using this feature, you could even try shooting handheld at shutter speeds of 1/10 or lower.

Keep in mind that the feature will only affect blurs coming from the camera’s movement and not the subject movement.

Use the Image Stabilization feature
Photo by Federico Bottos

2. Use Fast Lenses or Wide Apertures if Possible

Obviously, you could use a faster shutter speed to prevent blur. Fast lenses typically have wide apertures of f/2.8, f/2.0, f/1.4, etc.

Despite their steep price tag, they become a worthwhile investment for photographers that regularly shoot in the dark/low light conditions.

Fast lenses will inevitably increase your image exposure. This means that the photo will become brighter the faster the lens is.

Faster lenses allow the usage of faster shutter speeds that are less sensitive to body movement. In short, faster lenses make your shaking matter less.

Use fast lenses or wide apertures if possible
Photo by Conor Luddy

3. Crank the ISO up!

In digital cameras, your ISO will amplify the signal recorded by the camera’s sensor.

The ISO feature will help you shoot better in low-light conditions without the need to change the other settings in the exposure triangle. Unfortunately, higher ISO levels will make an image more “noisy.”

It is quite the trade off, noisy but bright photos or a blurry bright photo. Clearly, photographers would rather choose the photo with noise and not blurry.

You can also brighten the photos by using post-processing apps.

Camera ISO settings

4. Avoid Zooming In

Zooming in does not really affect the camera shaking, but it does limit what you see. The motion blur is more forgiving if taken using short focal lengths.

You can almost say that the motion blur is reduced by the wide field of view. Zooming in just magnifies everything, including the blur.

Avoid zooming in

5. Spray and Pray

The development of technology has brought us to the point where we can take hundreds of photos before we run out of space on our memory card.

Back in the olden days, we could only take a limited number of images before we ran out of film.

This improvement led us towards “spray and pray.” The word itself has many negative connotations to it, but in this case, it actually helps a lot when capturing sharper photos.

A bad technique of pressing the shutter button will make your images more prone towards camera shaking. More often than not, you could even amplify the camera shaking accidentally.

Compared to the less shaky burst mode. A mode where you only need to press the shutter button to start and stop taking images.

Taking multiple images in a sequence will give you an array of choices of images.

You can then easily choose the sharpest image among them.

Spray and Pray
Photo by Seth Doyle

There is also a certain way to shoot handheld while also avoiding camera shake.

6. Consider Camera Size and Weight

Small and Light cameras are much harder to grip comfortably. Their small weight makes it difficult to be held steadily.

Heavy and Large cameras are much easier to hold steadily and grip comfortably. Unfortunately, it can easily tire you without proper equipment or camera holding techniques.

Consider camera size and weight

7. Superior Photography Posture

An optimal posture for photography is usually a relaxed type, they help you take steady shots much better than other poses. Use poses that make you feel relaxed and reduce tension.

The less tension and stress on your body, the less your body shakes.

Try leaning onto your surroundings if you are shooting handheld with heavy equipment.

If you cannot lean onto anything around you, stabilize yourself by spreading your legs laterally (think about how Cristiano Ronaldo poses before a free kick), you could place one foot in front of the other.

You can also stick your elbows together while placing them close to your torso, this makes your camera more stable.

Superior Photography Posture

8. Be Aware of Your Bad Habits

Bad habits will often happen when capturing images while not using the viewfinder or if your camera does not have one. Since we cannot really see or preview the view before capturing it, we tend to use these awkward and unstable postures.

Make sure that you are not in a posture that relies on your muscles to keep the camera straight. The tension in your muscles will become more pronounced and make your camera even more shaky.

These postures are definitely a no-go when photographing, especially in low-light conditions.

How to Tell the Difference Between Camera Shake and Poor Focusing?”

From a moment’s glance, it would be painfully obvious that it would be hard to differentiate camera shake and poor focus.

Camera Shake has three components to it: Full Image Blur, Double Image, Motion Blur. Here are the descriptions for each of them.

Full Image Blur

This type of blur can be seen by zooming into your image. Observe and search for the lack of sharp points.

If there aren’t any sharp points, on the main subject, foreground, and background it would most likely be full image blur.

Double Image Blur

This type of camera shake is identified when you see two exposures in one image. These two exposures will stand out at the edges of your images.

Motion Blur

As the name suggests motion blur happens when there is some motion while taking long exposure photos. This comes up in the form of a blur that makes them look like they are moving.

The common giveaways are the light streaks and lines that appear when you close up the image.

Poor focusing is much simpler than camera shake. Poor focus can be easily identified by looking at the overall image.

Images that have a smooth looking blur everywhere will most likely be a result of poor focusing. On the other hand, camera shake will have a much more rough, jagged, harsh look to it.

Difference Between Camera Shake and Poor Focusing

Final Remarks

Camera shake can easily ruin one of your best shots. Every photographer prefers to have a noisy but sharp picture than a blurry image, making blur much more unpreferable.

Interestingly, camera shake photography does exist. They purposefully use the motion blur to make their images look fast.

Blur is an interesting topic since it can also be mistakenly seen as poor focusing. Luckily, you can easily distinguish them.

The blur appears more rough and jagged around the edges, while poor focus looks soft all over. Do not forget that you can easily prevent motion blur while performing handheld photography.

You can either use the technique and tips above, or maybe splurge some cash to buy a good tripod and wireless release.

2 thoughts on “What is Camera Shake? | Definition, Tips, and Examples”

  1. This is very interesting, You are a very skilled blogger.
    I have joined your rss feed and look forward to seeking more of your magnificent post.

    Also, I’ve shared your site in my social networks!


Leave a Comment


Copy and paste this code to display the image on your site